Supporting Old Systems
Old VME and cPCI systems are still used in a lot of platforms, simply because they have never gone wrong, however being now seriously out of date and working their way up the back end of the bath tub curve some of this old kit is going to have to be replaced.
With over 35 years experience in VME board design and support, our staff at Unitronix can help customers with support of old equipment and technology insertion of new cards to replace the ancient.
At UNITRONIX we are “Leaders in Trailing Edge Technology“, so if you have a problem with some old kit and are worried it is going to let you down right at the wrong moment, give us a call we may be able to help.
VME-1910
High-Performance SBC with Intel 9th Gen “Coffee Lake Refresh” Xeon Processor. Enhanced Processing and Security for VME Systems
Bring the latest high-performance Intel processing and Trusted Computing protections to your VME systems with the VME-1910 single board computer (SBC).
- Upgrade VME systems with cutting-edge processing technology
- Protect critical data with enhanced security capabilities
- Future-proof your investment
Featuring the Intel 9th Gen Xeon E “Coffee Lake Refresh” processor, the VME-1910 is a perfect replacement for legacy SBCs, bringing new life and increased performance into systems required to offer higher levels of functionality than previously deployed.
Upgrade VME Systems with Cutting-edge Processing Technology
VP B7x/msd
VME Processor Board
VP B7x/msd is a high performance, flexible 6U VME processor board based on a 6-core Intel® Xeon® E-2176M processor. It is designed for long life-cycle applications in the defence, industrial and scientific markets.
It has two on-board PMC/XMC sites for local I/O and sites for SATA Flash Disk, M.2 module and 2.5-inch SSD for local storage. Board support packages are available for Windows, Linux and VxWorks, contact Concurrent Technologies for availability on other operating systems.
TP B9x/msd
3U CompactPCI Processor
TP B9x/msd is 3U CompactPCI® board, plug compatible with the popular TP B1x/3sd family, allowing customers to easily migrate to the latest generation of Intel® Processors for improved performance and longer life deployments.
TP B9x/msd is based on the 11th Generation Intel® Core™ Processors, supporting Xe (Gen 12) graphics with up to 96 EUs. It offers a wide variety of standard I/O interfaces, as well as an optional XMC slot to add application specific I/O, and a site for an optional M.2 Module.
DEV-1290
3U Multi-Platform Table-Top Development Chassis
The 1290 Series Multi-Platform Table-Top Development 1101.10 compatible Chassis is the ideal choice where small size, light weight, portability, basic features and low cost are desired. The open frame design provides all the basics for getting your board set up and running without breaking your budget. This chassis travels well between the bench top and the trade show, allowing you to demo your new boards.
This chassis features two high-performance cooling fans, rear mounted on/off switch, table-top rubber feet, and perforated top cover. Within the 11.75” depth, a front 6U x 160MM, card cage and rear 6U x 80MM transition module card are provided to fully support your boards and I/O. The 1U ATX Power Supply provides adequate power for most configurations. The backplane may be up to 8-slots and may be cPCI 2.1, cPCI 2.16, VME, Vita 41 (VXS), or Vita 46 (VPX) or custom.
EXF-9815
6U X 60MM VME Form Factor Extender Board.
VMEbus specification IEEE-1014-1987 Compliant. Allows smaller boards to be installed into deeper card slots. Saves wear and tear on testing boards across the backplane. Assembled with retainer clips to securely fasten itself to the board being extended. High-performance, low noise stripline/microstrip design.
- 6UX60MM VMEbus Form Factor Extender Board
- Ships with J1 and J2 Connectors Installed
- Allows smaller boards to be installed into deeper card slots
- Saves wear and tear on board pins
- Provides Clean Power and Ground Distribution
VME Backplanes
6U VME64x Monolithic
VME64x Monolithic, 2 through 21 slots, optional J0 2mm connectors, shrouds on all J2 and J0 connectors, 8 layer stripline/microstrip design.
6U VME Monolithic
VME Monolithic, 2 through 21 slots, short-tail 96-pin DIN connectors standard on J1 slots, shrouds on all J2 connectors, 8 layer stripline/microstrip design.
3U VME Discrete J1
MEbus Specification Rev. C1 compliant, 3 through 21 slots, automatic or manual BUSGRANT/IACK jumpers front and back accessible.
3U VME Discrete J2
VMEbus Specification Rev. D, draft 3.03 IEEE 01014-1991 compliant, 2 through 21 slots, long-tail connectors standard.
CPCI Backplanes
3U CompactPCI 2.1
PICMG 2.1 compliant cPCI, 2 through 8 slots, 32 bit or 64 bit configurations, +5VIO or +3.3VIO, Short tail connectors on J1, long tail connectors on J2.
6U CompactPCI 2.16
PICMG 2.16 compliant cPCI, 2 through 8 slots standard sizes, left-justified CPU slots, shrouds on all J3, J4 and J5 connectors.
6U CompactPCI 2.1
PICMG 2.1 compliant cPCI, 2 through 8 slots standard sizes, left-justified CPU slots, shrouds on all J3, J4 and J5 connectors.
Call 02 4977 3511, let us guide you through the upgrade process
